Roller Bearings

|<<<< ( 2278 / 2301 ) >>>>|

1. Roller Bearings

A roller bearing is a type of rolling-element bearing that is designed to reduce friction between moving parts in various machinery and mechanical systems. It consists of two main components: an inner ring and an outer ring, with a set of cylindrical or tapered rollers placed between them. These rollers allow for smooth and low-friction rotation of the inner and outer rings relative to each other. The primary purpose of a roller bearing is to support axial and radial loads while minimizing friction and wear. The rolling motion of the cylindrical or tapered rollers reduces the sliding friction that would occur if two surfaces were in direct contact. This design helps improve the efficiency and lifespan of the machinery or equipment where roller bearings are used.

https://bearingswebshop.com/categories/roller-bearings

2. Drop Forging

Drop forging is a metal shaping process, the metal to be formed is first heated then shaped by forcing it into the contours of a die, this force can be in excess of 2000 tons. The drop forging process can be performed with the material at various temperatures. Hot Forging: During hot forging the metals are heated to above their recrystallization temperature. The main benefit of this hot forging is that work hardening is prevented due to the recrystallization of the metal as it begins to cool. Cold Forging: Cold Forging is generally performed with metal at room temperature below the the recrystallization temperature. Cold forging typically work hardens the metal. There are two types of drop forging, open die and closed die. Open die drop forging requires the operator to position the work piece while it is impacted by the ram. The die attached to the ram is usually flat or of a simple contour, most of the shaping is achieved by the operator physically positioning the work piece before each stroke of the ram. There are also special dies which can be used to cut the metal, form holes or notches.

http://www.kt-forge.co.uk/drop-forging

3. Skip Manager

Skip Manager has been designed to enable you to manage the hire of your skips more effectively. From the initial bookings, hire, tracking and collections to credit control, Skip Manager has the functionality required for your Waste Recycling business.

http://www.skip-manager.co.uk

4. Stainless Steel Pipes

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com

5. Student Accomodation in Huddersfield

4 Bedroom house to share: Student accomodation available to rent near Huddersfield University. House with four bedrooms to let with common sitting-room, shared kitchen and batchroom with over the bath shower. Two of the rooms have on suite toilet and wash basin. The house is located in the Paddock area of Huddersfield, post code HD1 and is 1.4 miles from the University, 1.2 miles from the Huddersfield train station. The house is on a regular bus route, buses 301a, 302 (every 15 minutes) and 302a.

http://student-accomodation-huddersfield.iam4rent.co.uk/

6. Doncaster Custom Software

Custom software, tailored to your business practices. 1T Solutions have been delivering bespoke integrated systems since our inception in 2001. The underlying philosophy with all our bespoke software projects is to wrap the software around our clients' business. It is a very sad fact, even today, that many software houses develop applications where the client must change their business practices to suit the software - not so with 1T Solutions. From small businesses to corporate clients, across a wide industry spectrum, we have a wealth of expertise in designing and implementing diverse business solutions.

http://doncaster.custom.software.1t-s.com

7. Rotherham Web Design

Professional and creative web design services. We build web sites for businesses across South Yorkshire, Rotherham, Sheffield, Doncaster and Barnsley. From a simple brochure to e-commerce with advanced dynamic content features, we can build the web site t promote your business on-line.

http://rotherham.web-design.1t-s.com

8. Rotherham Software Development

Software Development, tailored to your business practices. 1T Solutions have been delivering bespoke integrated systems since our inception in 2001. The underlying philosophy with all our bespoke software projects is to wrap the software around our clients' business. It is a very sad fact, even today, that many software houses develop applications where the client must change their business practices to suit the software - not so with 1T Solutions. From small businesses to corporate clients, across a wide industry spectrum, we have a wealth of expertise in designing and implementing diverse business solutions.

http://www.rotherham.software.development.1tsolutions.com

9. Stainless Steel Low Pressure BSP Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/low-pressure-fittings

10. Doncaster eCommerce

http://www.1t-s.com/internet-web-design

11. Software Development

Software development services, tailored to your business practices. 1T Solutions have been delivering bespoke integrated systems since our inception in 2001. The underlying philosophy with all our bespoke software projects is to wrap the software around our clients' business. It is a very sad fact, even today, that many software houses develop applications where the client must change their business practices to suit the software - not so with 1T Solutions. From small businesses to corporate clients, across a wide industry spectrum, we have a wealth of expertise in designing and implementing diverse business solutions.

http://www.software.development.abrt.com

12. Waste Collection Software

http://www.waste-collection-software.skip-manager.com

13. Computer Support

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://www.grid-itc.com/computer-support

14. Cold Forging

Cold forging is a high speed manufacturing process whereby metal is shaped at room temperature often without the need for the removal of material. A simple blank is placed within a die and a punch is pressed into the blank. The blank then takes on the form of the punch and the die. By utilising multiple dies and punches in succession very complex shapes can be achieved. Metal is forced beyond its yield (elastic) limit and retains its altered shape upon removal from the die. The metal is not forced beyond its tensile strength, otherwise fracturing would occur (the exception is when trimming or piercing). Historically cold forming has been an experienced based technology, but this is changing as new computer based analytical tools are constantly being developed.

http://cold-forging.kt-forge.co.uk

15. Stainless Steel Flange Gaskets

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/flange-gaskets

16. Ball Bearings

Steel City Bearings are one of the worlds leading suppliers of all bearing and transmission products. Steel City Bearings Ltd can offer the following to all its customers: Massive stocks of all leading brands * Same day despatch on ALL stock items * Over 100 years of bearing and transmission knowledge * Highly competitive pricing * Friendly and reliable sales team * Over 25,000 lines and 250,000 items in stock * Next day delivery to mainland UK including Northern Ireland

http://www.steelcitybearings.com

17. Steel City Bearings

http://www.steelcitybearings.com

18. Stainless Tube Supplier

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/stainless-steel-pipes

19. South Yorkshire Application Development

Computer applications software, tailored to your business practices. 1T Solutions have been delivering bespoke integrated systems since our inception in 2001. The underlying philosophy with all our bespoke software projects is to wrap the software around our clients' business. It is a very sad fact, even today, that many software houses develop applications where the client must change their business practices to suit the software - not so with 1T Solutions. From small businesses to corporate clients, across a wide industry spectrum, we have a wealth of expertise in designing and implementing diverse business solutions.

http://www.south-yorkshire.application.development.abrt.com

20. Mosque Message Display Board

Mosque Message Display Boad, Salah Times, Clock, Islamic calendar and message display board software program for PCs designed specially for Masjids and Mosques. Suitable for Jamat Times, Salah Timetable, Namaz Times, Salaat Times. Free Download.

http://mosque-message-display-board.jamat-times.com

21. Barnsley Bespoke Software

Bespoke software, tailored to your business practices. 1T Solutions have been delivering bespoke integrated systems since our inception in 2001. The underlying philosophy with all our bespoke software projects is to wrap the software around our clients' business. It is a very sad fact, even today, that many software houses develop applications where the client must change their business practices to suit the software - not so with 1T Solutions. From small businesses to corporate clients, across a wide industry spectrum, we have a wealth of expertise in designing and implementing diverse business solutions.

http://www.barnsley.bespoke.software.abrt.com

22. Low Pressure Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/low-pressure-fittings

23. Detailed WhoIs

The Detailed WhoIs tool not only checks the domain or IP address you request, but also looks up details of any associated domains and IP addresses, building a comprehensive report.

http://whois.1t-s.com

24. Bespoke Accounts Software

Download Ice Ledger accounts system now for free and get started. Fully featured, multi-currency accounts with Sales, Purchase and Nominal ledgers, Sales and Purchase Invoicing, Stock Control and more...

http://iceledger.com/

25. Stainless Steel Flange Gaskets

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/flange-gaskets

26. Open Die Forging

Open-die forging is also known as smith forging. In open-die forging, a hammer strikes and deforms the workpiece, which is placed on a stationary anvil. Open-die forging gets its name from the fact that the dies (the surfaces that are in contact with the workpiece) do not enclose the workpiece, allowing it to flow except where contacted by the dies. Therefore the operator needs to orient and position the workpiece to get the desired shape. The dies are usually flat in shape, but some have a specially shaped surface for specialized operations. For example, a die may have a round, concave, or convex surface or be a tool to form holes or be a cut-off tool. Open-die forging lends itself to short runs and is appropriate for art smithing and custom work. In some cases, open-die forging may be employed to rough-shape ingots to prepare them for subsequent operations. Open-die forging may also orient the grain to increase strength in the required direction. Cogging is successive deformation of a bar along its length using an open-die drop forge. It is commonly used to work a piece of raw material to the proper thickness.

http://open-die-forging.ktforge.co.uk

27. Barnsley Custom Software

http://www.barnsley.custom.software.1t-s.com

28. Software Development

http://www.abrt.com/software-development

29. Waste Recycling Software

http://waste-recycling-software.skip-manager.com

30. Stainless Steel Valves

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/stainless-steel-valves

31. Chesterfield Linux

1T Solutions install and support linux based open source solutions and systems to small and medium businesses across Rotherham, Sheffield, Barnsley, Doncaster, Chesterfield and across South Yorkshire.

http://chesterfield.linux.1t-s.com

32. Computer Support

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://www.abrt.com/computer-support

33. Stainless Steel Flanges

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/stainless-steel-flanges

34. SKF Bearings

http://www.steelcitybearings.com

35. Forging

Virtually all metals that can be moulded / drawn out may be forged by first heating and then hammering it in to the desired shape. A billet, wrought bar, cast or sintered ingot etc.. may be forged. Forging improves the toughness and strength of improving orientation of the metal grain structure. The repeated heating and hammering causes the metal to become more dense and the grain "flow lines" to follow the contour of the end product.

http://forging.kt-forge.co.uk

36. Rotherham Custom Software

http://www.rotherham.custom.software.1t-s.com

37. Salaat Times

Salaat Times, Salah Times, Clock, Islamic calendar and message display board software program for PCs designed specially for Masjids and Mosques. Suitable for Jamat Times, Salah Timetable, Namaz Times, Salaat Times. Free Download.

http://salaat-times.jamat-times.com

38. Custom Software

http://www.custom.software.abrt.com

39. Application Development

http://application.development.1t-s.com

40. Hygienic Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com

41. Custom Software

http://abrt.com/custom-software

42. Bespoke Software

http://bespoke-software.1tsolutions.com

43. Rooms For Rent Huddersfield

http://rooms-for-rent-huddersfield.iam4share.co.uk/

44. Student Accomodation Huddersfield

http://www.iam4rent.co.uk/student-accomodation-huddersfield

45. Stainless Pipe Supplier

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/stainless-steel-pipes

46. Upset Forging

Upset forging increases the diameter of the workpiece by compressing its length. Based on number of pieces produced this is the most widely used forging process. A few examples of common parts produced using the upset forging process are engine valves, couplings, bolts, screws, and other fasteners. Upset forging is usually done in special high-speed machines called crank presses, but upsetting can also be done in a vertical crank press or a hydraulic press. The machines are usually set up to work in the horizontal plane, to facilitate the quick exchange of workpieces from one station to the next. The initial workpiece is usually wire or rod, but some machines can accept bars up to 25 cm (9.8 in) in diameter and a capacity of over 1000 tons. The standard upsetting machine employs split dies that contain multiple cavities. The dies open enough to allow the workpiece to move from one cavity to the next; the dies then close and the heading tool, or ram, then moves longitudinally against the bar, upsetting it into the cavity. If all of the cavities are utilized on every cycle then a finished part will be produced with every cycle, which makes this process advantageous for mass production.

http://upset-forging.ktforge.co.uk

47. Alternative to Sage Accounts

Ice Ledger accounts system is an ideal alternative for sage accounts, download a fully working copy for free now and get started...

http://iceledger.com/

48. Sheffield Software Development

http://www.sheffield.software.development.1tsolutions.com

49. Rotherham Web Design

http://www.rotherham.web-design.1t-s.com

50. Computer Services

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://computer.service.1t-s.com

51. Student Accomodation Huddersfield

http://www.iam4share.co.uk/cheap-student-accomodation-huddersfield

52. Custom Software

http://1tsolutions.com/custom-software

53. Chesterfield Linux

http://www.chesterfield.linux.1t-s.com

54. Barnsley Computer Services

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://www.barnsley.computer.service.1t-s.com

55. Doncaster Bespoke Software

http://www.doncaster.bespoke.software.1t-s.com

56. Waste Collection System

http://www.waste-collection-system.skip-manager.com

57. Cold Forming

http://cold-forming.kt-forge.co.uk

58. Doncaster Software Development

http://doncaster.software.devlopment.1t-s.com

59. Hammer Forging

The most common type of forging equipment is the hammer and anvil. Principles behind the hammer and anvil are still used today in drop-hammer equipment. The principle behind the machine is simple: raise the hammer and drop it or propel it into the workpiece, which rests on the anvil. The main variations between drop-hammers are in the way the hammer is powered; the most common being air and steam hammers. Drop-hammers usually operate in a vertical position. The main reason for this is excess energy (energy that isn't used to deform the workpiece) that isn't released as heat or sound needs to be transmitted to the foundation. Moreover, a large machine base is needed to absorb the impacts. To overcome some shortcomings of the drop-hammer, the counterblow machine or impactor is used. In a counterblow machine both the hammer and anvil move and the workpiece is held between them. Here excess energy becomes recoil. This allows the machine to work horizontally and have a smaller base. Other advantages include less noise, heat and vibration. It also produces a distinctly different flow pattern. Both of these machines can be used for open-die or closed-die forging. A forging press, often just called a press, is used for press forging.

http://hammer-forging.kt-forge.co.uk

60. Stainless Steel Flange Gaskets

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/flange-gaskets

61. Barnsley Bespoke Software

http://barnsley.bespoke.software.abrt.com

62. Student Diggs in Huddersfield

http://www.iam4share.co.uk/student-diggs-huddersfield

63. Stainless Steel Hygienic Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/hygienic-fittings

64. Computer Support

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://abrt.com/computer-support

65. Rotherham Bespoke Software

http://rotherham.bespoke-software.1tsolutions.com

66. Sheffield Bespoke Software

http://www.sheffield.bespoke-software.1tsolutions.com

67. Barnsley Software Development

http://barnsley.software.development.abrt.com

68. South Yorkshire Software Development

http://south-yorkshire.software.development.1tsolutions.com

69. Roll Forging

Roll forging is a process where round or flat bar stock is reduced in thickness and increased in length. Roll forging is performed using two cylindrical or semi-cylindrical rolls, each containing one or more shaped grooves. A heated bar is inserted into the rolls and when it hits a stop the rolls rotate and the bar is progressively shaped as it is rolled through the machine. The piece is then transferred to the next set of grooves or turned around and reinserted into the same grooves. This continues until the desired shape and size is achieved. The advantage of this process is there is no flash and it imparts a favorable grain structure into the workpiece. Examples of products produced using this method include axles, tapered levers and leaf springs.

http://roll-forging.kt-forge.co.uk

70. Waste Management System

http://waste-management-system.skip-manager.com

71. Low Pressure BSP Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/low-pressure-fittings

72. Stainless Steel Hygienic Fittings

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/hygienic-fittings

73. Stainless Tube Supplier

ZX55.com are on-line suppliers of stainless steel products including Butt-Weld Fittings, Flanges, Gaskets, High Pressure Fittings, Hygenic Fittings, Low Pressure Fittings, Pipes and Valves.

https://www.zx55.com/categories/stainless-steel-pipes

74. Cold Forming

http://www.kt-forge.co.uk/cold-forming

75. Computer Services

Computer service and support across Rotherham, Sheffield, Doncaster and Barnsley. 1T Solutions Ltd offer cost effective computer maintenance for small and medium businesses.

http://www.computer.service.1t-s.com

76. Rotherham Bespoke Software

http://rotherham.bespoke.software.1t-s.com

77. Huddersfield University Student Accomodation

http://www.student-housing-huddersfield.co.uk/

78. South Yorkshire Web Design

http://www.south-yorkshire.web-design.1t-s.com

|<<<< ( 2278 / 2301 ) >>>>|

      Barnsley Application Development       -       Sheffield Linux       -       Stainless Steel Low Pressure Fittings       -       Sheffield Custom Software       -       Computer Support       -       South Yorkshire Open Source
      Forging Stainless Steel       -       Rotherham Application Development       -       Barnsley eCommerce       -       Steel Forging       -       Hot Forming       -       House to Share Huddersfield
      South Yorkshire eCommerce       -       Computer Services       -       Bankrupt Bearings       -       Computer Support       -       South Yorkshire Custom Software       -       Student Accomodation in Huddersfield
      Web Design       -       Stainless Steel Gaskets       -       Rotherham Custom Software       -       Computer Maintenance       -       Forging Stainless Steel       -       South Yorkshire Software Development
      Alternative to Sage Accounts       -       Sockolets       -       Detailed WhoIs       -       Chesterfield Open Source       -       Chesterfield Software Development       -       Sheffield Application Development
      Anti-Spam       -       Low Pressure Fittings       -       Rotherham Computer Services       -       Application Development       -       Forging Stainless Steel       -       Rooms For Rent Huddersfield
      Software Development       -       Doncaster Software Development       -       Forging       -       Stainless Steel Flanges       -       Sheffield Computer Services       -       Rotherham Software Development
      Hammer Forging       -       Engineering Blacksmiths       -       Open Die Forging       -       Threadolets       -       Computer Support       -       Waste Management Software
      House to Share Huddersfield       -       304 Stainless Steel       -       South Yorkshire Computer Services       -       Ice Ledger, Become a Partner and promote yourself and your organisation.       -       Chesterfield Software Development       -       Sheffield Bespoke Software
      Sockolets       -       Gatekeeper       -       Rotherham Open Source       -       Drop Forging       -       Barnsley Custom Software       -       eCommerce
      Sockolets       -       Bearing and Housing Units       -       Bearings       -       Skip Hire Software       -       Chesterfield Custom Software       -       Computer Services
      Rooms For Rent Huddersfield       -       Student Diggs in Huddersfield       -       Barnsley Software Development       -       Stainless Steel Hygienic Fittings       -       Smith Forging       -       Steel Forging
      Hot Forming       -       Computer Repair       -       Barnsley Bespoke Software       -       South Yorkshire Bespoke Software       -       Sheffield Bespoke Software       -       Doncaster Application Development
      Forging Stainless Steel       -       Business Accounting Software       -       Chesterfield Custom Software       -       Skip Hire System       -       High Pressure Fittings       -       Rotherham Software Development
      Barnsley Application Development       -       Sheffield Web Design       -       Forging Steel       -       Stainless Steel Tubing       -       Doncaster Open Source       -       Forging Steel
      Chesterfield Software Development       -       Sheffield Software Development       -       Hot Forming       -       Doncaster Application Development       -       Weldolets       -       Upset Forging
      South Yorkshire Bespoke Software       -       Swaging       -       Engineering Blacksmiths       -       Surplus Bearings       -       Computer Repair       -       Rotherham Custom Software
      Student Accomodation Huddersfield       -       Chesterfield Software Development       -       Bespoke Software       -       Stainless Steel Forging       -       Bearings       -       Sheffield Software Development
      Sheffield Bespoke Software       -       Application Development       -       Waste Management System       -       Barnsley Application Development       -       IT Services       -       Computer Services
      South Yorkshire Custom Software       -       Low Pressure Fittings       -       Drop Forging       -       South Yorkshire Application Development       -       Sheffield Custom Software       -       Threadolets
      Sheffield Bespoke Software       -       Waste Collection Software       -       Custom Software       -       Stainless Pipe Supplier       -       Self Lube Bearings       -       Stainless Steel Pipes
      Open Die Forging       -       Press Forging       -       Doncaster Software Development       -       Drop Forging       -       Student Diggs in Huddersfield       -       Cold Forming
      Waste Management System       -       Huddersfield University Accomodation       -       Computer Services       -       Press Forging       -       Stainless Steel Low Pressure Fittings       -       Chesterfield Bespoke Software
      House For Rent Huddersfield       -       Waste Recycling System       -       Bespoke Software       -       Stainless Steel Low Pressure BSP Fittings       -       Barnsley Linux       -       Rotherham Bespoke Software
      Barnsley Application Development       -       Low Pressure BSP Fittings       -       Jamat Times       -       Chesterfield Bespoke Software       -       Chesterfield Bespoke Software       -       Huddersfield University Accomodation
      Sheffield Software Development       -       Doncaster Bespoke Software       -       Doncaster Application Development       -       South Yorkshire Custom Software       -       Chesterfield Bespoke Software       -       Waste Recycling Software
      Rotherham Open Source       -       Butt-Weld Fittings       -       Low Pressure Fittings       -       Student Accomodation Huddersfield       -       Stainless Steel       -       Sanitary Fittings
      Doncaster Software Development       -       Custom Software       -       Stainless Steel Valves       -       Doncaster Custom Software       -       Application Development       -       Huddersfield University Student Accomodation
      Software Development       -       Sheffield Application Development       -       Waste Collection Software       -       Barnsley Computer Services       -       Custom Software       -       Rotherham Software Development
      Waste Collection Software       -       Skip Hire Software       -       Waste Collection Software       -       Rotherham Application Development       -       Stainless Steel       -       Waste Collection System
      Email Spam Filter       -       Student Accomodation Huddersfield       -       Barnsley Bespoke Software       -       Application Development       -       Sheffield Bespoke Software       -       Roll Forging
      Waste Recycling System       -       Rotherham Software Development       -       Computer Repair       -       South Yorkshire Application Development